wpa_supplicant-gui-2.10-150600.7.6.1<>,Pg!p9|_hC!8e/&V4\D6 ] ʖޛ(*R}clz%2^!xF˱5~+f ].Y@e6#;=e T aRVf+KФ*IVYk4#f| /EygϽ0O($bza'UZe@i֤>;4iݿW~ex۳ϙqw;W+<>ۍdz`TSU>>?d ' J0 FRou     $.8dl((U8\+9+: +F G$H,I4X8Y@\d]l^bcJdefluvw,x4y<z|Cwpa_supplicant-gui2.10150600.7.6.1WPA supplicant graphical front-endThis package contains a graphical front-end to wpa_supplicant, an implementation of the WPA Supplicant component.g!ibs-power9-21 SUSE Linux Enterprise 15SUSE LLC BSD-3-Clause AND GPL-2.0-or-laterhttps://www.suse.com/Unspecifiedhttps://w1.fi/wpa_supplicantlinuxppc64le 큤g!g!c6b05322c1743ca76fbe0369f900942834b3dc4d1c476b13bb0a73ac8b403289d57783ead2cca37539bf8b5c4a81b8105c2970de177652fe1a027433593467aarootrootrootrootwpa_supplicant-2.10-150600.7.6.1.src.rpmwpa_supplicant-guiwpa_supplicant-gui(ppc-64)@@@@@@@@@@@@@@@@    libQt5Core.so.5()(64bit)libQt5Core.so.5(Qt_5)(64bit)libQt5Gui.so.5()(64bit)libQt5Gui.so.5(Qt_5)(64bit)libQt5Widgets.so.5()(64bit)libQt5Widgets.so.5(Qt_5)(64bit)libc.so.6()(64bit)libc.so.6(GLIBC_2.17)(64bit)libc.so.6(GLIBC_2.34)(64bit)libc.so.6(GLIBC_2.38)(64bit)libgcc_s.so.1()(64bit)libgcc_s.so.1(GCC_3.0)(64bit)libstdc++.so.6()(64bit)libstdc++.so.6(CXXABI_1.3)(64bit)libstdc++.so.6(CXXABI_1.3.9)(64bit)libstdc++.so.6(GLIBCXX_3.4)(64bit)rpmlib(CompressedFileNames)rpmlib(FileDigests)rpmlib(PayloadFilesHavePrefix)rpmlib(PayloadIsXz)wpa_supplicant3.0.4-14.6.0-14.0-15.2-14.14.3ge}@c@b@b@`lM@`?z@`:4@`_|\@_i@_i@^@^@^|@^|@^Y]]>[<@[[ā@[[;@[@[QY@X@X]W@VU@VŲ@V`V=@UKSUCjU8U'@U/@TBV@cfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comcfamullaconrad@suse.comsp1ritCS@protonmail.comcfamullaconrad@suse.comsongchuan.kang@suse.comcfamullaconrad@suse.combwiedemann@suse.comcfamullaconrad@suse.comilya@ilya.pp.uatchvatal@suse.comtchvatal@suse.comilya@ilya.pp.uailya@ilya.pp.uakbabioch@suse.comro@suse.dekbabioch@suse.comkbabioch@suse.comkbabioch@suse.comro@suse.demeissner@suse.comobs@botter.ccdwaas@suse.commeissner@suse.comtchvatal@suse.comlnussel@suse.decrrodriguez@opensuse.orgcrrodriguez@opensuse.orgcrrodriguez@opensuse.orglnussel@suse.demichael@stroeder.comro@suse.dezaitor@opensuse.orgcrrodriguez@opensuse.orgstefan.bruens@rwth-aachen.destefan.bruens@rwth-aachen.destefan.bruens@rwth-aachen.de- CVE-2025-24912: hostapd fails to process crafted RADIUS packets properly (bsc#1239461) [+ CVE-2025-24912.patch]- Add CVE-2023-52160.patch - Bypassing WiFi Authentication (bsc#1219975) - Change ctrl_interface from /var/run to %_rundir (/run)- update to 2.10.0: jsc#PED-2904 * SAE changes - improved protection against side channel attacks [https://w1.fi/security/2022-1/] - added support for the hash-to-element mechanism (sae_pwe=1 or sae_pwe=2); this is currently disabled by default, but will likely get enabled by default in the future - fixed PMKSA caching with OKC - added support for SAE-PK * EAP-pwd changes - improved protection against side channel attacks [https://w1.fi/security/2022-1/] * fixed P2P provision discovery processing of a specially constructed invalid frame [https://w1.fi/security/2021-1/] * fixed P2P group information processing of a specially constructed invalid frame [https://w1.fi/security/2020-2/] * fixed PMF disconnection protection bypass in AP mode [https://w1.fi/security/2019-7/] * added support for using OpenSSL 3.0 * increased the maximum number of EAP message exchanges (mainly to support cases with very large certificates) * fixed various issues in experimental support for EAP-TEAP peer * added support for DPP release 2 (Wi-Fi Device Provisioning Protocol) * a number of MKA/MACsec fixes and extensions * added support for SAE (WPA3-Personal) AP mode configuration * added P2P support for EDMG (IEEE 802.11ay) channels * fixed EAP-FAST peer with TLS GCM/CCM ciphers * improved throughput estimation and BSS selection * dropped support for libnl 1.1 * added support for nl80211 control port for EAPOL frame TX/RX * fixed OWE key derivation with groups 20 and 21; this breaks backwards compatibility for these groups while the default group 19 remains backwards compatible * added support for Beacon protection * added support for Extended Key ID for pairwise keys * removed WEP support from the default build (CONFIG_WEP=y can be used to enable it, if really needed) * added a build option to remove TKIP support (CONFIG_NO_TKIP=y) * added support for Transition Disable mechanism to allow the AP to automatically disable transition mode to improve security * extended D-Bus interface * added support for PASN * added a file-based backend for external password storage to allow secret information to be moved away from the main configuration file without requiring external tools * added EAP-TLS peer support for TLS 1.3 (disabled by default for now) * added support for SCS, MSCS, DSCP policy * changed driver interface selection to default to automatic fallback to other compiled in options * a large number of other fixes, cleanup, and extensions - drop wpa_supplicant-p2p_iname_size.diff, CVE-2021-30004.patch, CVE-2021-27803.patch, CVE-2021-0326.patch, CVE-2019-16275.patch, CVE-2022-23303_0001.patch, CVE-2022-23303_0002.patch, CVE-2022-23303_0003.patch, CVE-2022-23303_0004.patch: upstream - drop restore-old-dbus-interface.patch, wicked has been switching to the new dbus interface in version 0.6.66 - config: * re-enable CONFIG_WEP * enable QCA vendor extensions to nl80211 * enable support for Automatic Channel Selection * enable OCV, security feature that prevents MITM multi-channel attacks * enable QCA vendor extensions to nl80211 * enable EAP-EKE * Support HT overrides * TLS v1.1 and TLS v1.2 * Fast Session Transfer (FST) * Automatic Channel Selection * Multi Band Operation * Fast Initial Link Setup * Mesh Networking (IEEE 802.11s) - Add dbus-Fix-property-DebugShowKeys-and-DebugTimestamp.patch (bsc#1201219) - Move the dbus-1 system.d file to /usr (bsc#1200342) - Added hardening to systemd service(s) (bsc#1181400). Modified: * wpa_supplicant.service - drop wpa_supplicant-getrandom.patch : glibc has been updated so the getrandom() wrapper is now there - Sync wpa_supplicant.spec with Factory- Enable WPA3-Enterprise (SuiteB-192) support.- Add CVE-2022-23303_0001.patch, CVE-2022-23303_0002.patch, CVE-2022-23303_0003.patch, CVE-2022-23303_0004.patch SAE/EAP-pwd side-channel attack update 2 (CVE-2022-23303, CVE-2022-23304, bsc#1194732, bsc#1194733)- Add CVE-2021-30004.patch -- forging attacks may occur because AlgorithmIdentifier parameters are mishandled in tls/pkcs1.c and tls/x509v3.c (bsc#1184348)- Fix systemd device ready dependencies in wpa_supplicant@.service file. (see: https://forums.opensuse.org/showthread.php/547186-wpa_supplicant-service-fails-on-boot-succeeds-on-restart?p=2982844#post2982844)- Add CVE-2021-27803.patch -- P2P provision discovery processing vulnerability (bsc#1182805)- Add CVE-2021-0326.patch -- P2P group information processing vulnerability (bsc#1181777)- Add wpa_supplicant-p2p_iname_size.diff -- Limit P2P_DEVICE name to appropriate ifname size (https://patchwork.ozlabs.org/project/hostap/patch/20200825062902.124600-1-benjamin@sipsolutions.net/)- Fix spec file for SLE12, use make %{?_smp_mflags} instead of %make_build- Enable SAE support(jsc#SLE-14992).- Add CVE-2019-16275.patch -- AP mode PMF disconnection protection bypass (bsc#1150934)- Add restore-old-dbus-interface.patch to fix wicked wlan (boo#1156920) - Restore fi.epitest.hostap.WPASupplicant.service (bsc#1167331)- With v2.9 fi.epitest.hostap.WPASupplicant.service is obsolete (bsc#1167331)- Change wpa_supplicant.service to ensure wpa_supplicant gets started before network. Fix WLAN config on boot with wicked. (boo#1166933)- Adjust the service to start after network.target wrt bsc#1165266- Update to 2.9 release: * SAE changes - disable use of groups using Brainpool curves - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * EAP-pwd changes - disable use of groups using Brainpool curves - allow the set of groups to be configured (eap_pwd_groups) - improved protection against side channel attacks [https://w1.fi/security/2019-6/] * fixed FT-EAP initial mobility domain association using PMKSA caching (disabled by default for backwards compatibility; can be enabled with ft_eap_pmksa_caching=1) * fixed a regression in OpenSSL 1.1+ engine loading * added validation of RSNE in (Re)Association Response frames * fixed DPP bootstrapping URI parser of channel list * extended EAP-SIM/AKA fast re-authentication to allow use with FILS * extended ca_cert_blob to support PEM format * improved robustness of P2P Action frame scheduling * added support for EAP-SIM/AKA using anonymous@realm identity * fixed Hotspot 2.0 credential selection based on roaming consortium to ignore credentials without a specific EAP method * added experimental support for EAP-TEAP peer (RFC 7170) * added experimental support for EAP-TLS peer with TLS v1.3 * fixed a regression in WMM parameter configuration for a TDLS peer * fixed a regression in operation with drivers that offload 802.1X 4-way handshake * fixed an ECDH operation corner case with OpenSSL * SAE changes - added support for SAE Password Identifier - changed default configuration to enable only groups 19, 20, 21 (i.e., disable groups 25 and 26) and disable all unsuitable groups completely based on REVmd changes - do not regenerate PWE unnecessarily when the AP uses the anti-clogging token mechanisms - fixed some association cases where both SAE and FT-SAE were enabled on both the station and the selected AP - started to prefer FT-SAE over SAE AKM if both are enabled - started to prefer FT-SAE over FT-PSK if both are enabled - fixed FT-SAE when SAE PMKSA caching is used - reject use of unsuitable groups based on new implementation guidance in REVmd (allow only FFC groups with prime >= 3072 bits and ECC groups with prime >= 256) - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-1/] (CVE-2019-9494, bsc#1131868) * EAP-pwd changes - minimize timing and memory use differences in PWE derivation [https://w1.fi/security/2019-2/] (CVE-2019-9495, bsc#1131870) - verify server scalar/element [https://w1.fi/security/2019-4/] (CVE-2019-9497, CVE-2019-9498, CVE-2019-9499, bsc#1131874, bsc#1131872, bsc#1131871, bsc#1131644) - fix message reassembly issue with unexpected fragment [https://w1.fi/security/2019-5/] (CVE-2019-11555, bsc#1133640) - enforce rand,mask generation rules more strictly - fix a memory leak in PWE derivation - disallow ECC groups with a prime under 256 bits (groups 25, 26, and 27) - SAE/EAP-pwd side-channel attack update [https://w1.fi/security/2019-6/] (CVE-2019-13377, bsc#1144443) * fixed CONFIG_IEEE80211R=y (FT) build without CONFIG_FILS=y * Hotspot 2.0 changes - do not indicate release number that is higher than the one AP supports - added support for release number 3 - enable PMF automatically for network profiles created from credentials * fixed OWE network profile saving * fixed DPP network profile saving * added support for RSN operating channel validation (CONFIG_OCV=y and network profile parameter ocv=1) * added Multi-AP backhaul STA support * fixed build with LibreSSL * number of MKA/MACsec fixes and extensions * extended domain_match and domain_suffix_match to allow list of values * fixed dNSName matching in domain_match and domain_suffix_match when using wolfSSL * started to prefer FT-EAP-SHA384 over WPA-EAP-SUITE-B-192 AKM if both are enabled * extended nl80211 Connect and external authentication to support SAE, FT-SAE, FT-EAP-SHA384 * fixed KEK2 derivation for FILS+FT * extended client_cert file to allow loading of a chain of PEM encoded certificates * extended beacon reporting functionality * extended D-Bus interface with number of new properties * fixed a regression in FT-over-DS with mac80211-based drivers * OpenSSL: allow systemwide policies to be overridden * extended driver flags indication for separate 802.1X and PSK 4-way handshake offload capability * added support for random P2P Device/Interface Address use * extended PEAP to derive EMSK to enable use with ERP/FILS * extended WPS to allow SAE configuration to be added automatically for PSK (wps_cred_add_sae=1) * removed support for the old D-Bus interface (CONFIG_CTRL_IFACE_DBUS) * extended domain_match and domain_suffix_match to allow list of values * added a RSN workaround for misbehaving PMF APs that advertise IGTK/BIP KeyID using incorrect byte order * fixed PTK rekeying with FILS and FT * fixed WPA packet number reuse with replayed messages and key reinstallation [https://w1.fi/security/2017-1/] (CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088) * fixed unauthenticated EAPOL-Key decryption in wpa_supplicant [https://w1.fi/security/2018-1/] (CVE-2018-14526) * added support for FILS (IEEE 802.11ai) shared key authentication * added support for OWE (Opportunistic Wireless Encryption, RFC 8110; and transition mode defined by WFA) * added support for DPP (Wi-Fi Device Provisioning Protocol) * added support for RSA 3k key case with Suite B 192-bit level * fixed Suite B PMKSA caching not to update PMKID during each 4-way handshake * fixed EAP-pwd pre-processing with PasswordHashHash * added EAP-pwd client support for salted passwords * fixed a regression in TDLS prohibited bit validation * started to use estimated throughput to avoid undesired signal strength based roaming decision * MACsec/MKA: - new macsec_linux driver interface support for the Linux kernel macsec module - number of fixes and extensions * added support for external persistent storage of PMKSA cache (PMKSA_GET/PMKSA_ADD control interface commands; and MESH_PMKSA_GET/MESH_PMKSA_SET for the mesh case) * fixed mesh channel configuration pri/sec switch case * added support for beacon report * large number of other fixes, cleanup, and extensions * added support for randomizing local address for GAS queries (gas_rand_mac_addr parameter) * fixed EAP-SIM/AKA/AKA' ext auth cases within TLS tunnel * added option for using random WPS UUID (auto_uuid=1) * added SHA256-hash support for OCSP certificate matching * fixed EAP-AKA' to add AT_KDF into Synchronization-Failure * fixed a regression in RSN pre-authentication candidate selection * added option to configure allowed group management cipher suites (group_mgmt network profile parameter) * removed all PeerKey functionality * fixed nl80211 AP and mesh mode configuration regression with Linux 4.15 and newer * added ap_isolate configuration option for AP mode * added support for nl80211 to offload 4-way handshake into the driver * added support for using wolfSSL cryptographic library * SAE - added support for configuring SAE password separately of the WPA2 PSK/passphrase - fixed PTK and EAPOL-Key integrity and key-wrap algorithm selection for SAE; note: this is not backwards compatible, i.e., both the AP and station side implementations will need to be update at the same time to maintain interoperability - added support for Password Identifier - fixed FT-SAE PMKID matching * Hotspot 2.0 - added support for fetching of Operator Icon Metadata ANQP-element - added support for Roaming Consortium Selection element - added support for Terms and Conditions - added support for OSEN connection in a shared RSN BSS - added support for fetching Venue URL information * added support for using OpenSSL 1.1.1 * FT - disabled PMKSA caching with FT since it is not fully functional - added support for SHA384 based AKM - added support for BIP ciphers BIP-CMAC-256, BIP-GMAC-128, BIP-GMAC-256 in addition to previously supported BIP-CMAC-128 - fixed additional IE inclusion in Reassociation Request frame when using FT protocol - Drop merged patches: * rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch * rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch * rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch * rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch * rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch * rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch * rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch * rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch * rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch * wpa_supplicant-bnc-1099835-fix-private-key-password.patch * wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch * wpa_supplicant-log-file-permission.patch * wpa_supplicant-log-file-cloexec.patch * wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch * wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch - Rebase patches: * wpa_supplicant-getrandom.patch- Refresh spec-file via spec-cleaner and manual optimizations. * Change URL and Source0 to actual project homepage. * Remove macro %{?systemd_requires} and rm (not needed). * Add %autopatch macro. * Add %make_build macro. - Chenged patch wpa_supplicant-flush-debug-output.patch (to -p1). - Changed service-files for start after network (systemd-networkd).- Refresh spec-file: add %license tag.- Renamed patches: - wpa-supplicant-log-file-permission.patch -> wpa_supplicant-log-file-permission.patch - wpa-supplicant-log-file-cloexec.patch -> wpa_supplicant-log-file-cloexec.patch - wpa_supplicant-log-file-permission.patch: Using O_WRONLY flag - Enabled timestamps in log files (bsc#1080798)- compile eapol_test binary to allow testing via radius proxy and server (note: this does not match CONFIG_EAPOL_TEST which sets -Werror and activates an assert call inside the code of wpa_supplicant) (bsc#1111873), (fate#326725) - add patch to fix wrong operator precedence in ieee802_11.c wpa_supplicant-git-fa67debf4c6ddbc881a212b175faa6d5d0d90c8c.patch - add patch to avoid redefinition of __bitwise macro wpa_supplicant-git-f5b74b966c942feb95a8ddbb7d130540b15b796d.patch- Added wpa-supplicant-log-file-permission.patch: Fixes the default file permissions of the debug log file to more sane values, i.e. it is no longer world-readable (bsc#1098854). - Added wpa-supplicant-log-file-cloexec.patch: Open the debug log file with O_CLOEXEC, which will prevent file descriptor leaking to child processes (bsc#1098854).- Added rebased-v2.6-0009-WPA-Ignore-unauthenticated-encrypted-EAPOL-Key-data.patch: Ignore unauthenticated encrypted EAPOL-Key data (CVE-2018-14526, bsc#1104205).- Enabled PWD as EAP method. This allows for password-based authentication, which is easier to setup than most of the other methods, and is used by the Eduroam network (bsc#1109209).- add two patches from upstream to fix reading private key passwords from the configuration file (bsc#1099835) - add patch for git 89971d8b1e328a2f79699c953625d1671fd40384 wpa_supplicant-bnc-1099835-clear-default_passwd_cb.patch - add patch for git f665c93e1d28fbab3d9127a8c3985cc32940824f wpa_supplicant-bnc-1099835-fix-private-key-password.patch- Fix KRACK attacks (bsc#1056061, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13087, CVE-2017-13088): - rebased-v2.6-0001-hostapd-Avoid-key-reinstallation-in-FT-handshake.patch - rebased-v2.6-0002-Prevent-reinstallation-of-an-already-in-use-group-ke.patch - rebased-v2.6-0003-Extend-protection-of-GTK-IGTK-reinstallation-of-WNM-.patch - rebased-v2.6-0004-Prevent-installation-of-an-all-zero-TK.patch - rebased-v2.6-0005-Fix-PTK-rekeying-to-generate-a-new-ANonce.patch - rebased-v2.6-0006-TDLS-Reject-TPK-TK-reconfiguration.patch - rebased-v2.6-0007-WNM-Ignore-WNM-Sleep-Mode-Response-without-pending-r.patch - rebased-v2.6-0008-FT-Do-not-allow-multiple-Reassociation-Response-fram.patch- fix wpa_supplicant-sigusr1-changes-debuglevel.patch to match eloop_signal_handler type (needed to build eapol_test via config)- Added .service files that accept interfaces as %i arguments so it's possible to call the daemon with: "systemctl start wpa_supplicant@$INTERFACE_NAME.service" (like openvpn for example)- updated to 2.6 / 2016-10-02 * fixed WNM Sleep Mode processing when PMF is not enabled [http://w1.fi/security/2015-6/] (CVE-2015-5310 bsc#952254) * fixed EAP-pwd last fragment validation [http://w1.fi/security/2015-7/] (CVE-2015-5315 bsc#953115) * fixed EAP-pwd unexpected Confirm message processing [http://w1.fi/security/2015-8/] (CVE-2015-5316 bsc#953115) * fixed WPS configuration update vulnerability with malformed passphrase [http://w1.fi/security/2016-1/] (CVE-2016-4476 bsc#978172) * fixed configuration update vulnerability with malformed parameters set over the local control interface [http://w1.fi/security/2016-1/] (CVE-2016-4477 bsc#978175) * fixed TK configuration to the driver in EAPOL-Key 3/4 retry case * extended channel switch support for P2P GO * started to throttle control interface event message bursts to avoid issues with monitor sockets running out of buffer space * mesh mode fixes/improvements - generate proper AID for peer - enable WMM by default - add VHT support - fix PMKID derivation - improve robustness on various exchanges - fix peer link counting in reconnect case - improve mesh joining behavior - allow DTIM period to be configured - allow HT to be disabled (disable_ht=1) - add MESH_PEER_ADD and MESH_PEER_REMOVE commands - add support for PMKSA caching - add minimal support for SAE group negotiation - allow pairwise/group cipher to be configured in the network profile - use ieee80211w profile parameter to enable/disable PMF and derive a separate TX IGTK if PMF is enabled instead of using MGTK incorrectly - fix AEK and MTK derivation - remove GTKdata and IGTKdata from Mesh Peering Confirm/Close - note: these changes are not fully backwards compatible for secure (RSN) mesh network * fixed PMKID derivation with SAE * added support for requesting and fetching arbitrary ANQP-elements without internal support in wpa_supplicant for the specific element (anqp[265]= in "BSS " command output) * P2P - filter control characters in group client device names to be consistent with other P2P peer cases - support VHT 80+80 MHz and 160 MHz - indicate group completion in P2P Client role after data association instead of already after the WPS provisioning step - improve group-join operation to use SSID, if known, to filter BSS entries - added optional ssid= argument to P2P_CONNECT for join case - added P2P_GROUP_MEMBER command to fetch client interface address * P2PS - fix follow-on PD Response behavior - fix PD Response generation for unknown peer - fix persistent group reporting - add channel policy to PD Request - add group SSID to the P2PS-PROV-DONE event - allow "P2P_CONNECT p2ps" to be used without specifying the default PIN * BoringSSL - support for OCSP stapling - support building of h20-osu-client * D-Bus - add ExpectDisconnect() - add global config parameters as properties - add SaveConfig() - add VendorElemAdd(), VendorElemGet(), VendorElemRem() * fixed Suite B 192-bit AKM to use proper PMK length (note: this makes old releases incompatible with the fixed behavior) * improved PMF behavior for cases where the AP and STA has different configuration by not trying to connect in some corner cases where the connection cannot succeed * added option to reopen debug log (e.g., to rotate the file) upon receipt of SIGHUP signal * EAP-pwd: added support for Brainpool Elliptic Curves (with OpenSSL 1.0.2 and newer) * fixed EAPOL reauthentication after FT protocol run * fixed FTIE generation for 4-way handshake after FT protocol run * extended INTERFACE_ADD command to allow certain type (sta/ap) interface to be created * fixed and improved various FST operations * added 80+80 MHz and 160 MHz VHT support for IBSS/mesh * fixed SIGNAL_POLL in IBSS and mesh cases * added an option to abort an ongoing scan (used to speed up connection and can also be done with the new ABORT_SCAN command) * TLS client - do not verify CA certificates when ca_cert is not specified - support validating server certificate hash - support SHA384 and SHA512 hashes - add signature_algorithms extension into ClientHello - support TLS v1.2 signature algorithm with SHA384 and SHA512 - support server certificate probing - allow specific TLS versions to be disabled with phase2 parameter - support extKeyUsage - support PKCS #5 v2.0 PBES2 - support PKCS #5 with PKCS #12 style key decryption - minimal support for PKCS #12 - support OCSP stapling (including ocsp_multi) * OpenSSL - support OpenSSL 1.1 API changes - drop support for OpenSSL 0.9.8 - drop support for OpenSSL 1.0.0 * added support for multiple schedule scan plans (sched_scan_plans) * added support for external server certificate chain validation (tls_ext_cert_check=1 in the network profile phase1 parameter) * made phase2 parser more strict about correct use of auth= and autheap= values * improved GAS offchannel operations with comeback request * added SIGNAL_MONITOR command to request signal strength monitoring events * added command for retrieving HS 2.0 icons with in-memory storage (REQ_HS20_ICON, GET_HS20_ICON, DEL_HS20_ICON commands and RX-HS20-ICON event) * enabled ACS support for AP mode operations with wpa_supplicant * EAP-PEAP: fixed interoperability issue with Windows 2012r2 server ("Invalid Compound_MAC in cryptobinding TLV") * EAP-TTLS: fixed success after fragmented final Phase 2 message * VHT: added interoperability workaround for 80+80 and 160 MHz channels * WNM: workaround for broken AP operating class behavior * added kqueue(2) support for eloop (CONFIG_ELOOP_KQUEUE) * nl80211: - add support for full station state operations - do not add NL80211_ATTR_SMPS_MODE attribute if HT is disabled - add NL80211_ATTR_PREV_BSSID with Connect command - fix IEEE 802.1X/WEP EAP reauthentication and rekeying to use unencrypted EAPOL frames * added initial MBO support; number of extensions to WNM BSS Transition Management * added support for PBSS/PCP and P2P on 60 GHz * Interworking: add credential realm to EAP-TLS identity * fixed EAPOL-Key Request Secure bit to be 1 if PTK is set * HS 2.0: add support for configuring frame filters * added POLL_STA command to check connectivity in AP mode * added initial functionality for location related operations * started to ignore pmf=1/2 parameter for non-RSN networks * added wps_disabled=1 network profile parameter to allow AP mode to be started without enabling WPS * wpa_cli: added action script support for AP-ENABLED and AP-DISABLED events * improved Public Action frame addressing - add gas_address3 configuration parameter to control Address 3 behavior * number of small fixes - wpa_supplicant-dump-certificate-as-PEM-in-debug-mode.diff: dump x509 certificates from remote radius server in debug mode in WPA-EAP.- Remove support for <12.3 as we are unresolvable there anyway - Use qt5 on 13.2 if someone pulls this package in - Convert to pkgconfig dependencies over the devel pkgs - Use the %qmake5 macro to build the qt5 gui- add After=dbus.service to prevent too early shutdown (bnc#963652)- Revert CONFIG_ELOOP_EPOLL=y, it is broken in combination with CONFIG_DBUS=yes.- spec: Compile the GUI against QT5 in 13.2 and later.- Previous update did not include version 2.5 tarball or changed the version number in spec, only the changelog and removed patches. - config: set CONFIG_NO_RANDOM_POOL=y, we have a reliable· random number generator by using /dev/urandom, no need to keep an internal random number pool which draws entropy from /dev/random. - config: prefer using epoll(7) instead of select(2) by setting CONFIG_ELOOP_EPOLL=y - wpa_supplicant-getrandom.patch: Prefer to use the getrandom(2) system call to collect entropy. if it is not present disable buffering when reading /dev/urandom, otherwise each os_get_random() call will request BUFSIZ of entropy instead of the few needed bytes.- add aliases for both provided dbus names to avoid systemd stopping the service when switching runlevels (boo#966535)- removed obsolete security patches: * 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch * 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch * 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch * 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch * wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch * 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch * 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch * 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch * 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch - Update to upstream release 2.5 * fixed P2P validation of SSID element length before copying it [http://w1.fi/security/2015-1/] (CVE-2015-1863) * fixed WPS UPnP vulnerability with HTTP chunked transfer encoding [http://w1.fi/security/2015-2/] (CVE-2015-4141) * fixed WMM Action frame parser (AP mode) [http://w1.fi/security/2015-3/] (CVE-2015-4142) * fixed EAP-pwd peer missing payload length validation [http://w1.fi/security/2015-4/] (CVE-2015-4143, CVE-2015-4144, CVE-2015-4145, CVE-2015-4146) * fixed validation of WPS and P2P NFC NDEF record payload length [http://w1.fi/security/2015-5/] (CVE-2015-8041) * nl80211: - added VHT configuration for IBSS - fixed vendor command handling to check OUI properly - allow driver-based roaming to change ESS * added AVG_BEACON_RSSI to SIGNAL_POLL output * wpa_cli: added tab completion for number of commands * removed unmaintained and not yet completed SChannel/CryptoAPI support * modified Extended Capabilities element use in Probe Request frames to include all cases if any of the values are non-zero * added support for dynamically creating/removing a virtual interface with interface_add/interface_remove * added support for hashed password (NtHash) in EAP-pwd peer * added support for memory-only PSK/passphrase (mem_only_psk=1 and CTRL-REQ/RSP-PSK_PASSPHRASE) * P2P - optimize scan frequencies list when re-joining a persistent group - fixed number of sequences with nl80211 P2P Device interface - added operating class 125 for P2P use cases (this allows 5 GHz channels 161 and 169 to be used if they are enabled in the current regulatory domain) - number of fixes to P2PS functionality - do not allow 40 MHz co-ex PRI/SEC switch to force MCC - extended support for preferred channel listing * D-Bus: - fixed WPS property of fi.w1.wpa_supplicant1.BSS interface - fixed PresenceRequest to use group interface - added new signals: FindStopped, WPS pbc-overlap, GroupFormationFailure, WPS timeout, InvitationReceived - added new methods: WPS Cancel, P2P Cancel, Reconnect, RemoveClient - added manufacturer info * added EAP-EKE peer support for deriving Session-Id * added wps_priority configuration parameter to set the default priority for all network profiles added by WPS * added support to request a scan with specific SSIDs with the SCAN command (optional "ssid " arguments) * removed support for WEP40/WEP104 as a group cipher with WPA/WPA2 * fixed SAE group selection in an error case * modified SAE routines to be more robust and PWE generation to be stronger against timing attacks * added support for Brainpool Elliptic Curves with SAE * added support for CCMP-256 and GCMP-256 as group ciphers with FT * fixed BSS selection based on estimated throughput * added option to disable TLSv1.0 with OpenSSL (phase1="tls_disable_tlsv1_0=1") * added Fast Session Transfer (FST) module * fixed OpenSSL PKCS#12 extra certificate handling * fixed key derivation for Suite B 192-bit AKM (this breaks compatibility with the earlier version) * added RSN IE to Mesh Peering Open/Confirm frames * number of small fixes- added patch for bnc#930077 CVE-2015-4141 0001-AP-WMM-Fix-integer-underflow-in-WMM-Action-frame-par.patch - added patch for bnc#930078 CVE-2015-4142 0001-WPS-Fix-HTTP-chunked-transfer-encoding-parser.patch - added patches for bnc#930079 CVE-2015-4143 0001-EAP-pwd-peer-Fix-payload-length-validation-for-Commi.patch 0002-EAP-pwd-server-Fix-payload-length-validation-for-Com.patch 0003-EAP-pwd-peer-Fix-Total-Length-parsing-for-fragment-r.patch 0004-EAP-pwd-server-Fix-Total-Length-parsing-for-fragment.patch 0005-EAP-pwd-peer-Fix-asymmetric-fragmentation-behavior.patch- Add wpa_s-D-Bus-Fix-operations-when-P2P-management-interface-is-used.patch Fix Segmentation fault in wpa_supplicant. Patch taken from upstream master git (arch#44740).- 0001-P2P-Validate-SSID-element-length-before-copying-it-C.patch Fix CVE-2015-1863, memcpy overflow. - wpa_supplicant-alloc_size.patch: annotate two wrappers with attribute alloc_size, which may help warning us of bugs such as the above.- Delete wpa_priv and eapol_test man pages, these are disabled in config - Move wpa_gui man page to gui package- Update to 2.4 * allow OpenSSL cipher configuration to be set for internal EAP server (openssl_ciphers parameter) * fixed number of small issues based on hwsim test case failures and static analyzer reports * P2P: - add new=<0/1> flag to P2P-DEVICE-FOUND events - add passive channels in invitation response from P2P Client - enable nl80211 P2P_DEVICE support by default - fix regresssion in disallow_freq preventing search on social channels - fix regressions in P2P SD query processing - try to re-invite with social operating channel if no common channels in invitation - allow cross connection on parent interface (this fixes number of use cases with nl80211) - add support for P2P services (P2PS) - add p2p_go_ctwindow configuration parameter to allow GO CTWindow to be configured * increase postponing of EAPOL-Start by one second with AP/GO that supports WPS 2.0 (this makes it less likely to trigger extra roundtrip of identity frames) * add support for PMKSA caching with SAE * add support for control mesh BSS (IEEE 802.11s) operations * fixed number of issues with D-Bus P2P commands * fixed regression in ap_scan=2 special case for WPS * fixed macsec_validate configuration * add a workaround for incorrectly behaving APs that try to use EAPOL-Key descriptor version 3 when the station supports PMF even if PMF is not enabled on the AP * allow TLS v1.1 and v1.2 to be negotiated by default; previous behavior of disabling these can be configured to work around issues with broken servers with phase1="tls_disable_tlsv1_1=1 tls_disable_tlsv1_2=1" * add support for Suite B (128-bit and 192-bit level) key management and cipher suites * add WMM-AC support (WMM_AC_ADDTS/WMM_AC_DELTS) * improved BSS Transition Management processing * add support for neighbor report * add support for link measurement * fixed expiration of BSS entry with all-zeros BSSID * add optional LAST_ID=x argument to LIST_NETWORK to allow all configured networks to be listed even with huge number of network profiles * add support for EAP Re-Authentication Protocol (ERP) * fixed EAP-IKEv2 fragmentation reassembly * improved PKCS#11 configuration for OpenSSL * set stdout to be line-buffered * add TDLS channel switch configuration * add support for MAC address randomization in scans with nl80211 * enable HT for IBSS if supported by the driver * add BSSID black and white lists (bssid_blacklist, bssid_whitelist) * add support for domain_suffix_match with GnuTLS * add OCSP stapling client support with GnuTLS * include peer certificate in EAP events even without a separate probe operation; old behavior can be restored with cert_in_cb=0 * add peer ceritficate alt subject name to EAP events (CTRL-EVENT-EAP-PEER-ALT) * add domain_match network profile parameter (similar to domain_suffix_match, but full match is required) * enable AP/GO mode HT Tx STBC automatically based on driver support * add ANQP-QUERY-DONE event to provide information on ANQP parsing status * allow passive scanning to be forced with passive_scan=1 * add a workaround for Linux packet socket behavior when interface is in bridge * increase 5 GHz band preference in BSS selection (estimate SNR, if info not available from driver; estimate maximum throughput based on common HT/VHT/specific TX rate support) * add INTERWORKING_ADD_NETWORK ctrl_iface command; this can be used to implement Interworking network selection behavior in upper layers software components * add optional reassoc_same_bss_optim=1 (disabled by default) optimization to avoid unnecessary Authentication frame exchange * extend TDLS frame padding workaround to cover all packets * allow wpa_supplicant to recover nl80211 functionality if the cfg80211 module gets removed and reloaded without restarting wpa_supplicant * allow hostapd DFS implementation to be used in wpa_supplicant AP mode- Update to 2.3 * fixed number of minor issues identified in static analyzer warnings * fixed wfd_dev_info to be more careful and not read beyond the buffer when parsing invalid information for P2P-DEVICE-FOUND * extended P2P and GAS query operations to support drivers that have maximum remain-on-channel time below 1000 ms (500 ms is the current minimum supported value) * added p2p_search_delay parameter to make the default p2p_find delay configurable * improved P2P operating channel selection for various multi-channel concurrency cases * fixed some TDLS failure cases to clean up driver state * fixed dynamic interface addition cases with nl80211 to avoid adding ifindex values to incorrect interface to skip foreign interface events properly * added TDLS workaround for some APs that may add extra data to the end of a short frame * fixed EAP-AKA' message parser with multiple AT_KDF attributes * added configuration option (p2p_passphrase_len) to allow longer passphrases to be generated for P2P groups * fixed IBSS channel configuration in some corner cases * improved HT/VHT/QoS parameter setup for TDLS * modified D-Bus interface for P2P peers/groups * started to use constant time comparison for various password and hash values to reduce possibility of any externally measurable timing differences * extended explicit clearing of freed memory and expired keys to avoid keeping private data in memory longer than necessary * added optional scan_id parameter to the SCAN command to allow manual scan requests for active scans for specific configured SSIDs * fixed CTRL-EVENT-REGDOM-CHANGE event init parameter value * added option to set Hotspot 2.0 Rel 2 update_identifier in network configuration to support external configuration * modified Android PNO functionality to send Probe Request frames only for hidden SSIDs (based on scan_ssid=1) * added generic mechanism for adding vendor elements into frames at runtime (VENDOR_ELEM_ADD, VENDOR_ELEM_GET, VENDOR_ELEM_REMOVE) * added fields to show unrecognized vendor elements in P2P_PEER * removed EAP-TTLS/MSCHAPv2 interoperability workaround so that MS-CHAP2-Success is required to be present regardless of eap_workaround configuration * modified EAP fast session resumption to allow results to be used only with the same network block that generated them * extended freq_list configuration to apply for sched_scan as well as normal scan * modified WPS to merge mixed-WPA/WPA2 credentials from a single session * fixed nl80211/RTM_DELLINK processing when a P2P GO interface is removed from a bridge * fixed number of small P2P issues to make negotiations more robust in corner cases * added experimental support for using temporary, random local MAC address (mac_addr and preassoc_mac_addr parameters); this is disabled by default (i.e., previous behavior of using permanent address is maintained if configuration is not changed) * added D-Bus interface for setting/clearing WFD IEs * fixed TDLS AID configuration for VHT * modified -m configuration file to be used only for the P2P non-netdev management device and do not load this for the default station interface or load the station interface configuration for the P2P management interface * fixed external MAC address changes while wpa_supplicant is running * started to enable HT (if supported by the driver) for IBSS * fixed wpa_cli action script execution to use more robust mechanism (CVE-2014-3686)ibs-power9-21 17418899902.10-150600.7.6.12.10-150600.7.6.1wpa_guiwpa_gui.8.gz/usr/sbin//usr/share/man/man8/-fmessage-length=0 -grecord-gcc-switches -O2 -Wall -D_FORTIFY_SOURCE=2 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -gobs://build.suse.de/SUSE:Maintenance:37861/SUSE_SLE-15-SP6_Update/9b432eb1227ff88675139bcb07b9c311-wpa_supplicant.SUSE_SLE-15-SP6_Updatedrpmxz5ppc64le-suse-linuxELF 64-bit LSB shared object, 64-bit PowerPC or cisco 7500, version 1 (SYSV), dynamically linked, interpreter /lib64/ld64.so.2, BuildID[sha1]=d782f112cf1ba0c3841aa0e0950874f22e0c84e1, for GNU/Linux 3.10.0, strippedtroff or preprocessor input, ASCII text (gzip compressed data, max compression, from Unix)R RRR RRRRR RRRRR R RH~ qQ9o1$utf-8e51c8b3bd4d2a0f16ed07044610cf7384122846ee974bb3c0c8ce8f85780bcf0? 7zXZ !t/?0]"k%}RUJzx+P"\5}i5!4,@n"=iq츼YD"\qRNI1AXK?mS&Jz#c.iY xxt|ekz FدCwVe(hB엿}NU!e>(>jBMU{=bHkPF$MERSm@VELcPp6) ERק1zn7#>vL_+ǏOWgz,]1{,ŔSm8tˆ*K>irNue-*#V1w7`bDloӮ CcfeS0(B'5X?EBe!r̭"XqZgdc,8 ~V`++SK *չa7.hzp Ϭqڑ>ZCz}ng:Ԉ6e 7(ɿnZA\ Sk`ޞ1gv^3$R/HC$L3ɼ/%?:D%9P Jp}65NNGyJ1P &t-GB:l2a׃M LA[^S_&WfG/h] :5ߍlm0%\wrT{8Ra Hq)oQbT\k^9*REذ '5IQ>#e2 !rZe;l@4j[]vza d$EZ9aWj C.4sIQ" DtiMU f0q_V\[9IZA MٮlM/$х[fZo/ ^9WA]%X&'/$tl|^erI*kA[ Ql%#o )bl* Vv^)skO܋w,6;j;jS"JP,[ Kjl bϻ?2z 'ЎcEyP!a b d-s%reG e SAS:v<TDϐ@KA(6xFpE9)ͦ-̿||:ni^AwO8}qj?7Yچ৽/ρ30ayd ^d*SQD_"DZzbkHs98wG=$A="WɇV%ɺBmDSD0DhH.W NGji9yMhHZk@]bC˘QaVI5Lʠ$& IX|y~[ \f5&KZ1G 9! cnnEdVs7.:[eG[FR5I򣯁a+i<}&~:lVs]GDZOy8` i-@GLXxAiRiH+ _kUgW 0::(d۫B9#T٩PPwq|GAof TF,j׵͹KCG"%;`rH4Sf:=MDs؇ G뒻IńrDkfRRs.rK|O_’$-lśS C;Y$3AAXA[5}0a!ӜʉNpl'^8lj8R@tkyN.Rd ̭n,2tfjG`ЇN:ݵ˧w5:Uv8hx` T" `oi4HkΌ>Ь-V!q"$k-AρޒQS1iDpBD\5zj[ņrzߝrf]jyq|m=85.WSM+I=7-A_=}T%"XޓEF_"ghSI_U"=]Cj6  X|"kGyq^c,˭>ULR8@=.췢9$q>SX0vwSnzU ̜r%b6g~=zY1-4IF4K$IDžfFEppK>,zZa G{iJ/I*VpI}A/jw7`/E-w5e5 tƭ&2Hk%3yghO񻳓{%0g(b7z[30abK7 S2PԽ5au߃ue~m4y!3y z3?9M2^ӆv:`[:P3EfA* Kߡ5lRG.87JEb \u!<^0HqQu:m~hc}T=&:!>#3Z>BKӞ}$QUn5U25I IjD vR&B~׻xzǥ lLhF,aO{1"CƍLBD)(Teü"OpgszeѮdb#)n) J2P:x.e*+Gڪb;zZ)R#z~g?$5$TpڵbhcY,ut|ݎ*{˨pupf! K}ýH_VH3 .<$z̜jb4(1 R8MB2bs`Ei1=U̍ԽjpWmfgpNGum8A7} :+6M=~vg+Jָ4-6aLeib7u(8QTԏܙۨ@ו3l[>&́C%ӹMS~a(<0ї'FW6O pfgk?3(ٷzIB4iH "E[W^]X~s^SZčZJ#c㤥F D9_`߸bO]zeLڜ5V S_ bi|+F yCv -J(8* q#qNŚhgQ<<ݍz^?[?fAq jd*_#'-E0_cL^\&Kf Ah-^oQMIUQ_hvgy 6͞D ˻קA?F*ǘ%fONSI34 4{óQ]CLI#NJ8x_ڀaMM$B KW7캦x*z mtq.\U$Rhg;͜r0|wh%\L ]haR `Oty4ձI5[SpJ. ]Cv[HiV4C")A*Mg*2U)1@Lo `^۴L,W EtƓ,a1$ r:vg-g] ˨z76E9$U?EbTzOz OEl1nh.{/n6 \z)2솬q ƍ.wH=h~0X{J8b{|5%yU<92VTEVcl= m}$ӊm,~誼-Cڴ>sOro(K?a1O*A>B}-LnEuOLɔzLMxSt6^ h% ##p% *OeX3 qMm3+˙7-ȁ2qz;]C34ҟlb3aVq~UW8kԐLΣTqpҁCYUNLWCD`?uX!_Pt[d+2(FFLFGfо<[Ê.. $Mˑj{?K:٢qyV-zi@$\`6\D;'J^cg%GDIEx5 }KWg9+Rl}K0}2"`{[#Rn7:2 u(KiZOTPF/yW:aQɻߥֿ_M u5[s6'tconJ drH9!_kHX vrxjƄ9]hU!$K6~3m N= f-?#'M W -1&j<\Kw*]jZZ;ZvLq:Z#)JJNZњ;R9?XïxRX=V~ÿq?CV|qkxM)$fڐJNc{Y f=~+bJ7H* R3;E8/fBWêXAr//<Hp0O/;:JbY3 찓v t\ÍfVavJ^ƁnMRdף g0LyrHыÞhVl!nD}W،b^ 8ފC ͳs43rOf|^=@?*c3i Ġ5 aVw`;~LTԎ/a,O1aϰvL%|pMSڸGa Y5GM5!>jNu[1rP,[ g㣾*V uGE1*FnMt^KjbAz .;A9^j/{7Gc&[bj5ƆG ؇N#1"(h׈MhF"vB =Z E{]O}Pӓ%iطxދ ,VAz/,03.>V@H]OT~g*I恗1F&Mlhw)RE+|6UGV޾# U PEsG-]{\kZ}|&=̶5T,YG)衏A>G{'OJ7ypy#Di`=ݝPwdvF1)3N{dML2`V4=+?Ͻ2:/ J7 @YJŽ1ܥ,l{lD)5<…yܐWDg!WCl9\_Xĸ8a;s5;q4߄~nlI"ݼZ\R{Ay~3F7$*bQKc5>NOlJ VP(b3<$ ( +cNC>B P Yȉϓ?u 7v;A#8k9Yr'À{hU{y8 É>,!5}(|uHlLh EѴe]܁չ`)@Y6c8ڊ)Ƽ6ذDK&=-ix±HH؉Pi`E;It2p@qu~I+7,#/έjwv2_ډF\<%-G\cd4NŢ8Bw( Q%ɑTJׯ9%0'#,4C5(|r@$S"9?W Sm<5ѹ6%)i\4&d¨u>jS>n.$}\*h`6F1Z"S+e,>`?Z$g9{ZAzf4na3/: P v>Q3xm͜ʇA7bá"g'+Y9. r0I*T#@r<#`wUr(c^[Y~]يa ҿ1 `#,"tju.MWs@W^ 5aQaЦlhKP f޽n85n@ GȩkUko&Lﳣ.$6pTSIr%=#J꘴O*aj&$̷z,u}oB%&XcEʃ)'җD˝RZ>Vyac`=%O qmA7h*,›F.+|ˋs)AY"J= pmLo5`Q݈8,^x(c"mE|װuLLJl:V?;7f2FAF^u[*k74*ѝ]}83EaQ]!b <ԮfH84瞫_b&Lua4m}-ՇUn-:cyAN_Y۴ aP5x^&iw#+tUӐBINbCaJjf܊+s,8ioGs&z-x}ׄWo;+^xYb諊@eL +M=8}8k49ZvجRT2a*I빨ǚ;Т'F2@$- ^ wڸ.%3[>?I^L|둽+6i{ţߠ;yH.s=Z6R_ Pr9~O Z^VŻ'rK[IV_RoH t{e[|]"՜kIgAlLʏ fq?SoCrRܔ"+;Bْމvv۸|ڀxvsXj%:6赆ʮ ěu!G"fb>eD{0ˉVzuTu~" G]{ V'+Jy Gi˶o!i>;6T0P=Bye+'~i/&XǠ0{z9St0Ǔ?I;`DPf n@E]E-ϋ p(L t]%Öo[%aqIPhʦ15%kKדcDi:OV8gšNyK]`6錕s܍ < ן5kOvLO! xJI.:apuH&.eO=f|_u]1AQ;H(EY[yy7>,:|x# 'pЮ164TLwPb`אwAnfkY3U'.|z-h*jXSSTA> v콰s`Y&Jk-˷JGImq@H1 Dlm"}WXj?ifG%C G;,#;'<[iMNR9BrR_a30L$prv!3(dgMBٱkX}Nν9J;o<%ӯO#;ڡdٟɗtQ?Jnp]S=Q"R1`։RhKT)tk6UaY 39O)qbx/66tESVaxr=c;i i^"`; 0jn4qB=h n 0 9p/es@q>'%W<,R'|02 i"u@(h协ڗuQ̣h~FVGn?:`rq mqNp87$c%k,8m{&WIPبk.!I]1XrR\`'u &F H5w(GKy=-mn{ Нyət-YސB0PМ#H>.i /YQ`e郃g%?:96A+:B btMtVhDezk9k.S> | n%l A%-,L1ͬ)z8+wu5*hI`hUW?`.maG'WY'UhBt"۴&{QS-:FPp ;FAXunRa"Uǝ`oX ׵o@&:й8Z; KS 7uy&_4DzgPvA8X,Qcq]-'@PO3Ma1C#z0;沘pva׻x#?cK,P*PH+؁RLR/WZCW׺5Aˁ;fjYႽ=޵$P W49l[in6Ne :{v` )| F,5+ER4@S +=uؽ2E<β_ȃɹ-~+}pw_г5")BtE*wwG&s^7."sIWG1/cz_ǖa@ko@yӭ7BMJG9S|%`^c YZ